Product Details
Silicone Adjuvant For Agriculture
- Chemical name: Polyalkyleneoxide Modified Trisiloxane
- Cas No: 67674-67-3
- Equivalent Product: Momentive Silwet 408, Break thru S 240-Evonik
- Agricultural Silicone Spreading and Penetrating Agent
Silicone Adjuvant For Agriculture ZG-608
Product name: Agricultural Silicone Spreading and Penetrating Agent
Key Words: Spreading, Wetting & Penetrating Agent/Adjuvant/Surfactant, agriculture silicone spreading penetrating agent
Description
Chemical name: Polyalkyleneoxide Modified Trisiloxane
Cas No: 67674-67-3
Equivalent Product: Momentive Silwet 408, Break thru S 240-Evonik
Silicone Adjuvant For Agriculture ZG-608 is a modified trisiloxane, and is an organic silicone surfactant with super ability of spreading. It makes the water surface tension lower down to the 20.5mN/m at the concentration of 0.1%(wt.). After being mixed with the pesticide solution at a certain proportion, it can lower the contact angel between the spray and foliage, which can enlarge the coverage of the spray. Furthermore, Silicone Agricultural Spreading and Penetrating Agent ZG-608 can make the pesticide absorbed through the stomatal of leaves, which is extremely effective for improving efficacy, reducing amount of pesticide, saving cost and reducing environmental pollution caused by pesticides.
Features
EU REACH Registration
Super spreading for exceptional spray coverage of crop and plant surfaces
Up to 70% spray volume reduction to lower water use and application costs
Excellent penetration providing better pesticide uptake and efficacy
Better spray treatment adhesion on crop and plant surfaces
Rainfastness to lower pesticide wash-off and waste
Lower use levels than non-silicone surfactants
Technical Index
Item | Typical Value |
Appearance | Colorless to light amber liquid |
Surface tension (0.1%) | 20.5±0.5 mN/m |
Density | 1.01-1.03 g/cm3 |
Effective Content | 100% |
Viscosity, 25℃ | 30-50 mPa.s |
Cloud point（1% in water solution) | < 10℃ |
Ion type | Nonionic |
Solubility | Soluble in water |
How to use
Used as a component in agrochemical formulations
When ZG-608 be added to agrochemical formulations, the recommended dosage amount is 0.5%-8%. Adjust the PH value of the formulations to 6-8. Users should adjust the dosage amount ofZG-608 according to different varieties and condition in order to achieve the most cost-effective results.
Used as a tank mix additive
As a tank mix additive, ZG-608 can improve spray coverage, promote absorption, and reduce the amount of spray. When spray mixture PH is 6-8, and be used within 24 hours after preparation, ZG-608 performs best.
In fact, usually 0.025%-0.1%ZG-608 added in the low spray volume can achieve a sufficient coverage. Typical usage amount is listed as follows:
Plant Growth Regulator | 0.025%-0.05% |
Herbicide | 0.025%-0.15% |
Pesticide | 0.025%-0.10% |
Bactericide | 0.015%-0.05% |
Fertilizers and trace element | 0.015%-0.10% |
Packing
N.W.: 25KG / 200KG Plastic drums, 1000KG IBC drums or other packing on request.
Transportation & Storage
1. Transported as non-dangerous chemicals.
2. Require sealed and airproof packing.
3. Should be stored in a shady cool, ventilated warehouse.
4. Keep away from fire, heat source, direct sunlight and rain.
5. Avoid from oxidant, acid, alkali chemical materials and other impurities.
